不銹鋼機箱機柜一般運用在野外，野外環境雜亂，時節改變大，不銹鋼機箱機柜接受的溫度也不一樣。不銹鋼機箱機柜的投入運用，內部設備放置非常多，外界的溫度升高也會影響機柜內部設備，因而在對其野外投入運用前。

Stainless steel chassis and cabinets are generally used in the wild, where the environment is chaotic and the seasons change greatly. The temperature accepted by stainless steel chassis and cabinets is also different. The application of stainless steel chassis and cabinets requires a large number of internal equipment to be placed, and the increase in external temperature can also affect the internal equipment of the cabinets. Therefore, before its outdoor application, it is necessary to.

咱們可以針對不銹鋼機箱機柜進行噴涂一些隔熱的涂料，這樣可以下降體內的溫度。若是箱內空間可以的話，可以在里面增加一個排氣扇，這樣，當溫度到達某定值溫度的時分，就能自動起動排氣扇。

We can spray some insulation coatings on stainless steel chassis and cabinets to reduce the temperature inside the body. If there is enough space inside the box, an exhaust fan can be added inside, so that when the temperature reaches a certain set value, the exhaust fan can be automatically started.

建議不銹鋼機箱機柜內的聯接導線放有余量，總歸導線載流量的余量有比室內留得多，因為環境溫度不同。

It is recommended to leave a margin for the connecting wires inside the stainless steel chassis and cabinet, and the overall wire carrying capacity should have a much greater margin than indoors due to different environmental temperatures.

當然咱們需求根據不同的箱體來選擇改善不銹鋼機箱機柜的溫度方法，根據上面的方法來操作，少可以削減對不銹鋼機箱機柜的損害。

Of course, we need to choose methods to improve the temperature of stainless steel chassis and cabinets based on different boxes. By operating according to the above methods, we can at least reduce the damage to the stainless steel chassis and cabinets.

不銹鋼機柜選用不銹鋼作為主要資料，在防銹蝕方面功能突出，無論是在酸性環境還是在堿性環境中，都能保持原樣，但這并不意味著不銹鋼機柜就真的能“不銹”，常見的不銹鋼機柜“生銹”的情況就有晶間腐蝕和均勻腐蝕兩種。

The stainless steel cabinet is selected as the main material, which has outstanding functions in rust prevention and corrosion. It can maintain its original appearance in both acidic and alkaline environments. However, this does not mean that the stainless steel cabinet can truly "rust free". Common cases of "rust" in stainless steel cabinets include intergranular corrosion and uniform corrosion.

晶間腐蝕，是一種因為晶粒表面和內部間化學成分的差異以及晶界雜質或內應力的存在，而損壞晶粒間的結合的現象。當因為晶粒和晶界區的組織不同，令兩者電化學性質發生顯著差異時，不銹鋼就或許在某種腐蝕介質的影響下發生晶間腐蝕。晶間腐蝕會極大地損壞金屬的機械強度，減弱其力學性能，令金屬連一般的敲擊都難以承受，與此同時，卻保留了金屬光澤難以調查出損壞的跡象，因而很容易造成嚴重損壞。

Intergranular corrosion is a phenomenon that damages the bonding between grains due to differences in chemical composition between the surface and interior of grains, as well as the presence of impurities or internal stresses at grain boundaries. When there is a significant difference in electrochemical properties between grains and grain boundaries due to their different structures, stainless steel may undergo intergranular corrosion under the influence of a certain corrosive medium. Intergranular corrosion can greatly damage the mechanical strength of metals, weaken their mechanical properties, and make them difficult to withstand even ordinary knocking. At the same time, it retains the luster of the metal and is difficult to detect signs of damage, making it easy to cause serious damage.

均勻腐蝕，又被稱作腐蝕，是一種會對金屬整個表面或大部分表面進行損壞的腐蝕方法，化學腐蝕或電化學腐蝕都或許引起均勻腐蝕。這種腐蝕對金屬的損壞性極大，但是容易發現，危險反而較低。

Uniform corrosion, also known as comprehensive corrosion, is a corrosion method that damages the entire or most of the surface of a metal. Chemical or electrochemical corrosion may cause uniform corrosion. This type of corrosion has great damage to metals, but it is easy to detect and the danger is actually lower.

本文由濟南機箱機柜友情奉獻.更多有關的知識請點擊: http://www.kisansushi.com 真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by Jinan Chassis Cabinet Friendship. For more relevant knowledge, please click on: http://www.kisansushi.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned